Проблема с CD-DVD RW

  • Автор теми Nota
  • Дата створення

Nota

http://justech.fd - user
Тут какая проблемка, у меня вчера слител виндовз , я его востановил, сначала мышка не работала, потом опять востановил токо через Реаниматор, мышка работает а Сиди Дисковод - нет, виндовз не видет а в биосе присуцтвует, пробывал ещо другой Сидюк , тоже самое биосе есть а в виндовсе нима!!!!:!:
помогите с этим вопросом плизз!!
 

Desertrose

Member
Ответ: Проблема с CD-DVD RW

Переставь :)
А если серьезно,то вспомни,что ставил на компьютер,и почисти реестр.
еще с форума:

Hi,

I recently uninstalled a burning program.
When I restarted, Windows failed to
detect my DVD-rw drive. The bios can detect
it but Windows does not. I have tried
System Restore (rolling back to a couple
of points) and Windows XP still does not recognize the drive.

I have restored to a previous point, but
the drive is not detected. I have restored
to an even previous system point, but
the drive is still not recognized.

Device Manager said that the driver
is corrupt or missing. I have tried rollback
on the driver but it did not have a back-up.
Of course I cannot update the drive via
CD-ROM and Windows can't find a better driver
than the one already in there.

Hardware Specs:
SSBG1 small form factor (current bios)
Windows XP Home SP2 (up from SP1)
758mb RAM pc2700

Drive in question:
Samsung DVD+-R/RW
TS-H552U

Thanks for your input

Hi

I uninstalled it from Device Manager
and turned off the computer for about
a couple of minutes. I came back
and opened up the computer and disconnected
the parallel cable and the power cable
running from the DVD-rw drive.

I left it like that for a couple minutes
while I got a sandwich. I turned on the
computer and made sure that the drive is
still not being detected. It is not.
So I proceeded to turn off the computer
again. Then I disconnected all the external
cables from the computer (power, Ethernet,
mice, keyboard, etc.) and left it for a
minute.

I reconnected all the external cables
(power, Ethernet, mice, keyboard, etc.)
and reconnected the parallel and
power cables into the DVD-rw drive.

I turned on the computer and windows
detected the drive
Try this.If you are comfortable editing the registry:
Create a Restore point and back up the registry.Open regedit.
Look for;

HKEY_LOCAL_MACHINE\system\CurrentControlSet\SetControlClass.
Key name: {4D36E965-E325-11CE-BFC1-08002BE10318}
Value Data:[Delete all value data from upper and lower filters]
Note-Do not delete the key or the multi-string values. Delete only the data values.
It also may be in
HKEY_LOCAL_MACHINE\system\CurrentControlSet\SetControlClass001 or 002 or 003
Exit regedit and reboot.
Here's what I did to fix my
Samsung TS-H522U DVD-rw drive:

I got the part where I needed to
uninstall Roxio Easy CD Creator.

I went into the Registry
by typing "regedit" from Start > Run.

I found the keyname
{4D36E965-E325-11CE-BFC1-08002BE10318}
under HKEY_LOCAL_MACHINE\SYSTEM\
CurrentControlSet\Control\Class.

In that keyname, I found LowerFilters,
LowerFilters.Bak, UpperFilters, and
UpperFilters.Bak.

I deleted those entries. Rebooted.

Voilб!

The drive is back to being recognized
by Windows XP. I did install Roxio Easy
CD Creator but I had to take it off because
space was limited on my HD. I did not know
that it was the culprit to all of this.

I hope this was a huge help to anyone else out there. I thank per and masterjuan
for all of their input. Thank you!
Ну вот что нашел,пробуй.
 
Зверху